Your reliable Partner for cables, plastic pipes and synthetic foams

In its three business divisions Eupen Cable, Eupen Pipe and Eupen Foam, Kabelwerk Eupen AG develops and produces high-quality cables, plastic pipes and synthetic foams. With decades of experience, our company ranks among the leading manufacturers in Europe in the three aforementioned areas.

The Eupen Cable division is successfully producing high-quality power and communication cables fore more than 110 years and supplies its products in over 70 countries. Eupen Pipe is offering a broad product range of temperature resistant PVC and Polyethylene pipes for gas, water and waste water applications, and cable protection as well.
Eupen Foam is supplying synthetic foams in blocks or as tailor-made finished products primarily to the bedding and furniture industry but also to the packaging industry and for medical and other industrial applications.

Our local virtues have become our global strengths. “Made in EUPEN” stands for quality, safety, seriousness, reliability and timely deliveries. These Traditional values are very well appreciated around the world.  Our ability to meet and fulfill customer demands and expectations without compromise makes Kabelwerk Eupen AG a reliable long term partner for numerous national and international companies.


September 2021

Dear customers,

all of you know that on July 15th, 2021, we were struck hard by a flood catastrophe. Therefore, because of this act of nature beyond our control, we had no other option than to declare “Force Majeure” for our three business divisons – Eupen Cable, Eupen Pipe and Eupen Foam.

This terrible disaster hit us all badly and confronted us with enormous challenges. A special thanks goes to our employees, who immediately after the catastrophe started with high motivation the clean-up and repair works on the production installations of our company. The work is progressing better than expected and is still in full swing. At this point, we could see that solidarity and community spirit can move mountains… even mountains of mud and debris!

Because, on the said July 15th, 2021 , we found ourselves in a situation which actual scale left us speechless. There was no power, water nor gas supply anymore. Parts of production facilities and administration buildings were seriously damaged. Quite a few production devices were exposed to a several meters high muddy flood wave for hours.

Today, however, about eight weeks after that fatal day, we would like revert to you with some encouraging news:

Our division Eupen Pipe (plastic pipes) had a stroke of luck and was only slightly hit by the water masses. However, the area surrounding the factory, like the access roads, bridges etc., were heavily affected. But due to strong support, also by the Technical Services of the City of Eupen, it was possible to restore the company access road already at the beginning of August. Therefore, this business unit could completely resume its activities already on August 9th, 2021. In the meantime, the Eupen Pipe division reached again its full operability and we were able to lift its “Force Majeure” status on September 9th, 2021, which is a fantastic and encouraging success. For the Eupen Cable and Eupen Foam divisions, regrettably, we are still obliged to maintain their “Force Majeure” status. The complete repair works of the damaged production installations and halls and of the entire infrastructure will still take several months.

In the Eupen Foam business division (polyurethane foam products), the cleaning work on the important foaming machines is as good as completed. If the subsequent repair of the mechanics goes according to plan, production could gradually start again before the end of the year.

For the Eupen Cable (cables and wires) business unit, the spotlight is on our RF cable department (coaxial cables). Because of its slightly higher position on the company grounds, it was “only” inundated by a water level of 80 cm. For this reason, the reconstruction of this production segment was given top priority. Production was already resumed begin of September, and today, we are very confident to put back into operation almost all production installations of our RF cable department until the end of October. This would mean that within few weeks, we could have again at our disposal about 90% of our regular production capacity of this key segment of our cable portfolio. This would be another big step forward on our long journey back to our old strength.

The before-mentioned efforts bear further fruits! In some production departments of the Eupen Cable division, the professionally carried out clean-up and repair works of our machinery, of the motors, of the electronic controls and of various mechanical parts go faster than originally planned. Therefore, after good progress in reconditioning, a gradual resumption of production for individual products should be expected at the end of the year. We will get back to you in the next few weeks with further details on products and estimated resumption dates.

We are sorry not to be able to serve your orders as usual in the divisions Eupen Cable and Eupen Foam at the moment. We would love to meet your wishes and help you with the realization of your projects – but unfortunately our hands are still tied at the moment.

We thank you for your understanding and hope – as soon as the business divisions Eupen Cable and Eupen Foam are able to act and produce again – to see you soon again and to supply you with the usual high quality. We do our best and hope to repay your trust in our quality and service soon!

Best regards

Your Kabelwerk Eupen AG


Within railway systems, tunnels and stations are considered as construction works with increased safety requirements in terms of the European Construction Products Regulation (CPR).

RF Product News

Kabelwerk EUPEN AG is expanding its EUCARAY® product portfolio with a new 1-1/4″ radiating cable optimised for 5G in the 3.5 GHz band […]

Product News

FHS/VPC Manchon universel

Pour le raccordement de conduites d’évacuation de même diamètre nominal en différents matériaux et de différents diamètres ou structures extérieures (annelées ou lisses). Manchette d’étanchéité en EPDM, colliers de serrage en acier inoxydable […]

Our website uses cookies and thereby collects information about your visit to improve our website (by analyzing) and to show Social Media content. Please see our privacy policy page for furher details or agree by clicking the 'Accept' button.

Cookie settings

Below you can choose which kind of cookies you allow on this website. Click on the "Save cookie settings" button to apply your choice.

FunctionalOur website uses functional cookies. These cookies are necessary to let our website work.

AnalyticalOur website uses analytical cookies to make it possible to analyze our website and optimize for the purpose of a.o. the usability.

Social mediaOur website places social media cookies to show you 3rd party content like YouTube and FaceBook. These cookies may track your personal data.

AdvertisingOur website places advertising cookies to show you 3rd party advertisements based on your interests. These cookies may track your personal data.

OtherOur website places 3rd party cookies from other 3rd party services which aren't Analytical, Social media or Advertising.